156-315.82 Exam Dumps and Practice Questions

The correct answer isB, with one important precision: in R82, SmartConsole Central Deployment is primarily used for Security Gateways and Cluster Members, and R82 enhancements also add support for package installation onSecondary Management Servers,Dedicated Log Servers, andDedicated SmartEvent Servers. Check Point's R82 ''What's New'' documentation states that Central Software Deployment through SmartConsole was enhanced to support installation of packages on Secondary Management Servers and Dedicated Log Servers. The Security Management Administration Guide also states that Central Deployment can deploy Upgrade Packages on Security Gateways, Cluster Members, Log Servers, and secondary management. Option A is incomplete because it omits Dedicated Log Servers. Option C reflects the older/common gateway-and-cluster focus but is incomplete for R82. Option D is plainly wrong because clusters are supported. The best available answer is thereforeB, but a strict administrator should interpret ''Security Management Servers'' here as supportedsecondary managementtargets, not a blanket claim that every primary management server upgrade should be driven through Central Deployment. Reference topic:R82 Central Deployment Enhancements / Supported Targets.

The correct answer isA. IKEv1 Phase 1 Main Mode usessix packets. Check Point's R82 Site-to-Site VPN guide states that Main Mode is the default IKEv1 Phase 1 mode and that the Security Gateway performs the IKE negotiation with six packets. Main Mode is preferred over Aggressive Mode because part of the exchange becomes encrypted once both peers know the shared Diffie-Hellman key, and it is less susceptible to denial-of-service conditions than Aggressive Mode. Option D is wrong because three packets correspond to IKEv1 Aggressive Mode, not Main Mode. Option B and Option C are not valid packet counts for the standard IKEv1 Main Mode exchange. For CCSE exam precision, memorize the simple mapping:IKEv1 Main Mode = 6 packets; IKEv1 Aggressive Mode = 3 packets. This is one of the standard Check Point VPN mechanics questions and appears frequently because it tests whether the candidate can distinguish Main Mode from Aggressive Mode without confusing them with IKEv2 exchanges. Reference topic:IKE Phase I Modes.

The correct answer isD. In Check Point R82, an external Network Feed object represents feed data hosted on an external HTTP or HTTPS server. The Security Gateway fetches, parses, and automatically updates the feed object according to changes on the external source server. The feed can contain IP addresses, IP ranges, domains, or both, and it can be used in Access Control, HTTPS Inspection, and NAT policy as a source or destination. Option A describes behavior closer to dynamic objects, not Network Feeds. Option B is directionally close, but the most technically precise point is that theSecurity Gateway fetches the external feedand updates enforcement automatically. Option C describes Check PointUpdatable Objects, where service-related IP ranges are maintained by Check Point cloud services, not customer-hosted Network Feeds. The operational benefit of Network Feeds is reduced manual maintenance and fewer policy installations because updates are fetched automatically by the gateways. Reference topic:External Network Feeds.

The correct answer isD. In the Advanced Upgrade method, the Management Database is exported using the R82migrate_serverutility fromExpert mode, specifically from the $FWDIR/scripts/ directory. The R82 CLI Reference Guide explicitly states that the command must be run from Expert mode, and the syntax shows cd $FWDIR/scripts/ followed by ./migrate_server export -v R82 ... /<Full Path>/<Name of Exported File>. Option A is wrong because Clish is not the correct shell for this operation. Option B is wrong because the command is not located under $CPDIR/bin/ for the documented R82 procedure. Option C is wrong because migrate is the older tool and Clish is still the wrong shell. In CCSE terms, Advanced Upgrade means database export/import using migrate_server, not a Gaia Portal or SmartConsole operation. The correct operational form is:Expert mode $FWDIR/scripts/ ./migrate_server export -v R82 ....

The correct answer isB. ElasticXL belongs to theScalable Platformstechnology family. Check Point's R82 Scalable Platforms Administration Guide states that the guide covers products based on Scalable Platform technology, includingElasticXL Cluster, Quantum Maestro, and Quantum Scalable Chassis. ElasticXL is not merely traditional ClusterXL under another name; it is a scalable-platform implementation designed to provide simplified management, horizontal scaling, high availability, and load distribution through a Single Management Object model. Option A is wrong because ClusterXL is the legacy clustering technology family, while ElasticXL is positioned as a scalable-platform alternative. Option C is wrong because SecurePlatform was an older operating system family and is irrelevant to R82 ElasticXL. Option D is not a Check Point product family; synchronization is a function, not the technology family. For CCSE R82, map it cleanly:ElasticXL Cluster = Scalable Platforms, not legacy ClusterXL. Reference topic:R82 Scalable Platforms Administration Guide / Products based on Scalable Platform technology.