Limited-Time Offer: Enjoy 50% Savings! - Ends In 0d 00h 00m 00s Coupon code: 50OFF
Welcome to QA4Exam

Practice questions demo

L5M9 Exam Dumps and Practice Questions

Questions 1 to 5 of the 120-question L5M9 bank, each with its correct answer and an explanation. 1 of 5 ask for more than one answer. This is page 1 of 24.

1 / 24

Actual CIPS L5M9 Exam Questions

Question 1

There are four manufacturing companies located on Seashell Industrial Estate. Each company creates a different product and employs a different maintenance approach to its operations. For each company, select the corresponding maintenance approach and the key operating process characteristic.

Company 1: This company creates craft beer and offers customers a tour of the brewery for a small charge. The brewing equipment is serviced monthly and the brewery is kept extremely clean. All equipment is labelled with the last service date.

Company 2: This company produces seasonal items such as Easter Eggs and Christmas Cake. The equipment has a control panel where lights will flash red advising staff to check oil levels and components. Staff can then report issues to the maintenance team if remedial work is required. Product demand fluctuates throughout the year.

Company 3: This equipment does not often break down and is only fixed when it is reported by staff as no longer working. Company 3 creates toys, providing a large range of product sizes and colours based on different customer requirements.

Company 4: Parts of the machine are serviced quarterly but in general, the machine is left to run its course and is then replaced when it is no longer financially viable to fix. The company produces cereal and the operating process is focused on the quantity produced and therefore uses standardised processes.

Complete the table below by listing the maintenance approach and operating process characteristic for each company. Each response should only be used once: preventive maintenance, run to breakdown maintenance, condition-based maintenance, mixed maintenance, volume, visibility, variation, variety

Company

Maintenance approach

Operating-process characteristic

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 2?

Correct answer: C

Company 2 uses indicator lights to prompt checks of oil levels and components before failure. Condition-based maintenance relies on observed state or diagnostic alerts, allowing intervention when an asset shows signs of deterioration. It can improve reliability while avoiding servicing that is not yet needed. A time-only reminder would be preventive maintenance, and waiting until the machine stops is run-to-breakdown. Seasonal production makes uptime especially important because failures during peak periods can cause disproportionate losses. Where consequences are significant, managers should prioritise preventive controls, reliable monitoring and prompt restoration. Performance measures such as downtime, MTBF, repair time and availability help identify weaknesses. The chosen technique must also account for costs, safety and the possibility of common-cause failures. The appropriate selection is condition-based maintenance. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. Documented responsibilities, suitable spare capacity and tested recovery arrangements can reduce the duration and consequences of disruption.

Study Guide Reference: CIPS L5M9 -- Explain techniques in failure prevention and recovery that can be applied in operations management; the uploaded question bank cites study-guide page(s) 48, 103.

Question 2

There are 5 foundational aspects of Total Productive Maintenance. Which of the following do these include? Select THREE

Correct answer: A, B, C

The five elements of 5S are Sort, Set in Order, Shine, Standardise and Sustain. Sort removes unnecessary items; Set in Order establishes visible locations; Shine cleans and inspects equipment; Standardise maintains consistent practice; Sustain embeds discipline and audits. Selling and selecting are not elements. TPM benefits from 5S because operators can readily access equipment and notice leaks, damaged components or other abnormalities. The approach supports safety, shorter search times and effective autonomous maintenance. A successful quality programme coordinates design, suppliers, operations and customer feedback. Preventing defects generally provides greater value than discovering them after production, although verification remains essential. Improvement must therefore link preventive controls, capable employees and meaningful measures of customer-defined quality. The required selections are sorting, sustaining and shining. These choices address the particular category named in the question, whereas the remaining alternatives describe other activities, dimensions or outcomes. Management commitment and employee competence are necessary to translate the quality approach into stable everyday operating practices.

Study Guide Reference: CIPS L5M9 -- Evaluate the role of total quality management in operations management; the uploaded question bank cites study-guide page(s) 110.

Question 3

Which of the following is not an example of Statistical Process Control?

Correct answer: C

Histograms show statistical distributions, scatter plots explore relationships between two measured variables and check sheets collect observations for quantitative analysis. Flowcharts instead map process steps, decisions and hand-offs. They help reveal unnecessary approvals, loops and bottlenecks but do not by themselves compute variation or control limits. All four are recognised basic quality tools, but the question asks which is primarily process mapping rather than statistical examination. Formal SPC particularly relies on time-ordered control charts, although other analysis tools support diagnosis. Teams should distinguish prevention, detection and measurement rather than treating all quality methods as interchangeable. Reliable data, appropriate thresholds and documented follow-up are essential. Improvements should target the causes of nonconformity while ensuring that product and service requirements remain satisfied. The appropriate selection is flowchart. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. The resulting evidence should support management decisions and feed back into standard operating procedures and employee training.

Study Guide Reference: CIPS L5M9 -- Analyse techniques for quality improvement that can be applied in operations management; the uploaded question bank cites study-guide page(s) 124.

Question 4

Which of the following situations would use a fixed-position layout?

Correct answer: B

Fixed-position layout keeps a very large product stationary while people, machinery and materials travel to it. Shipbuilding is an established example: structural, mechanical and electrical trades work around the vessel. The arrangement avoids repeated movement of a heavy, complex assembly but requires careful scheduling of scarce workspace and specialist resources. Vehicle assembly typically uses a moving line; supermarkets and buffets are designed around customer and goods flow, not a stationary manufacturing project. A useful way to assess the choice is to trace how inputs pass through the process and identify where capacity or coordination can fail. This helps management plan equipment, responsibilities and material flows without assuming that the same layout, staffing or control method suits every organisation. The appropriate selection is ship construction. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. A clear specification of responsibilities and measurement criteria helps prevent resources being allocated according to assumptions rather than operational requirements.

Study Guide Reference: CIPS L5M9 -- Analyse the role and activities of operations management in organisations; the uploaded question bank cites study-guide page(s) 17.

Question 5

Little Joy Ltd is a large company with several functional departments. Below are details of four departments. For each, you must decide which functional area of the business the department is, as well as the SERVQUAL Gap that each Department Lead is concerned with.

Department 1: This department is concerned with the creation of products. The products are created in line with BS EN 716-1 and undergo rigorous tests before they leave the factory. Many customers are unaware of the additional costs of testing to BS EN 716-1 and complain about the price of this product line.

Department 2: Other departments of the business are internal customers of this functional area and approach the Department Lead when they require something to be bought. Often the internal customers have unrealistic expectations of the timescales involved in the process and the Department Lead spends a lot of time explaining lead times and logistics.

Department 3: This functional area creates the budgets for the company and emails these to the Department Leads at the beginning of every quarter. Due to the complexity of the documents, other functional areas of the business often don't understand the information provided.

Department 4: This area of the business is concerned with revenue, which has recently slumped. The Department Lead is conducting market surveys to find out the reason for this.

Complete the table below by listing the Functional Area of the business, and the corresponding SERVQUAL Gap. Each response should only be used once: procurement, finance, sales, production, satisfaction gap, delivery gap, standards gap, communication gap.

Department

Functional area

SERVQUAL gap

Department 1

Box 1

Box 5

Department 2

Box 2

Box 6

Department 3

Box 3

Box 7

Department 4

Box 4

Box 8

Which of the following will you put into box 1?

Correct answer: D

Production is responsible for converting inputs into finished goods and maintaining conformity with technical requirements. The department manufactures items to BS EN 716-1 and undertakes testing, establishing that it performs the production function. Product safety, traceability, inspection records and process control are central duties. Procurement acquires materials, finance prepares budgets, and sales develops revenue. Although these departments collaborate, creating and verifying finished products is production's distinguishing responsibility. A useful way to assess the choice is to trace how inputs pass through the process and identify where capacity or coordination can fail. This helps management plan equipment, responsibilities and material flows without assuming that the same layout, staffing or control method suits every organisation. The appropriate selection is production. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. A clear specification of responsibilities and measurement criteria helps prevent resources being allocated according to assumptions rather than operational requirements.

Study Guide Reference: CIPS L5M9 -- Analyse the role and activities of operations management in organisations; the uploaded question bank cites study-guide page(s) 9, 56.

Unlock all CIPS L5M9 questions

Full exam access, validated answers, and unlimited practice with no download limits.