Exam dumps demo
Preview page 1 of 109 with real questions 1 to 5 from the full 547-question Cisco set.
The Cisco 350-501 exam, titled "Implementing and Operating Cisco Service Provider Network Core Technologies," is associated with Cisco Certified Internetwork Expert, Cisco Certified Internetwork Expert Service Provider, and Cisco Certified Network Professional Service Provider. It is designed for networking professionals who work with service provider core environments and want to validate advanced knowledge in core technologies. This exam matters because it demonstrates your ability to understand, operate, and support critical service provider network functions with confidence.
| # | Exam Topics | Sub-Topics | Approximate Weightage (%) |
|---|---|---|---|
| 1 | Architecture | Service provider network design, core and edge roles, control plane and data plane concepts | 20% |
| 2 | Networking | Routing fundamentals, IGP concepts, BGP operations, protocol interaction in service provider networks | 20% |
| 3 | MPLS and Segment Routing | MPLS forwarding, label distribution, L3VPN basics, segment routing architecture and operations | 25% |
| 4 | Services | VPN services, multicast concepts, quality of service, service provider service integration | 15% |
| 5 | Automation and Assurance | Automation workflows, telemetry, monitoring, assurance tools, operational visibility | 20% |
The Cisco 350-501 exam tests both conceptual understanding and practical application across service provider core technologies. Candidates must show that they can analyze architectures, operate routing and MPLS-based solutions, and apply automation and assurance concepts in real-world environments. It is a knowledge-intensive exam that rewards hands-on familiarity and the ability to connect theory with operational tasks.
Refer to the exihibit.
Refer to the exhibit. A network engineer is implementing BGP in AS 65101 and AS 65201. R3 sends data traffic to 192.168.1.1 /32 via the path R3-R2-R1. The traffic must travel via alternate path R6-R5 for prefix 192.168.1.1/32. Which action must be taken to meet the requirement?
Refer to the exihibit.
Refer to the exhibit. A network engineer is implementing multicast Source-A to send a multicast stream for Receiver-A, and multicast Source-B to send a multicast stream for Receiver-B. Router RC forwards the IGMP host a report and leaves messages to IP address 192.168.10.1. How must the multicast features be implemented to prevent RB from receiving multicast flooding from Source-A?
A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an engineer apply?
The correct configuration for the BGP route policy named SUBNET, as per the second set of text in the image details, is to drop traffic if the destination is in BGP. Otherwise, the MED value should be set to 400 and community (4:400) should be added. This matches Option B, which specifies these exact actions.Reference:= The information is based on the image details provided and aligns with common BGP route policy configurations typically found in Cisco's service provider network core technologies documentation.
Refer to the exhibit.
Which type of DDoS attack will be mitigated by this configuration?
The configuration shown in the exhibit is used to disable IP directed-broadcasts on a specific interface of a network device. This is typically done to mitigate smurf attacks, which involve sending a large amount of ICMP echo (ping) traffic to IP broadcast addresses, all having a spoofed source address of the victim's IP. By disabling IP directed-broadcasts, the network device will not forward packets that are sent to broadcast addresses, thus mitigating this type of DDoS attack.Reference: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) - Module on Security in the Service Provider Network
Refer to the exhibit.
A network engineer is implementing a standard customer route-policy on ASBR1 with these requirements:
* It must accept only customer-assigned prefixes
* It must preserve customer advertised BGP communities
* It must set the local-preference to 110 for all prefixes
* It must attach the ORIGINATION-PE and LOCAL-CITY communities to all accepted prefixes.
Which route policy must the engineer implement on ASBR1 to satisfy the requirements?
The correct route policy to satisfy the requirements is Option C. This option likely contains the necessary commands to:
Accept only customer-assigned prefixes, which can be specified using an access list or prefix list.
Preserve customer advertised BGP communities, which is typically done with theset communitycommand along with theadditivekeyword to ensure existing communities are not overwritten.
Set the local-preference to 110 for all prefixes, which is achieved with theset local-preference 110command.
Attach the ORIGINATION-PE and LOCAL-CITY communities to all accepted prefixes, which would also use theset communitycommand with both community values specified and theadditivekeyword.
Full exam access, validated answers, and unlimited practice with no download limits.
QA4Exam.com offers Cisco 350-501 Exam PDF material with actual questions and answers, plus an Online Practice Test built to help you prepare more efficiently. The practice format gives you a real exam simulation so you can get used to the style, timing, and pressure of the test. You also benefit from up-to-date questions and verified answers, which makes your study time more focused and practical. With repeated practice, you can improve time management, identify weak areas, and build the confidence needed to pass the Cisco 350-501 exam on your first attempt.
It is intended for networking professionals preparing for Cisco Certified Internetwork Expert, Cisco Certified Internetwork Expert Service Provider, or Cisco Certified Network Professional Service Provider paths and working with service provider core technologies.
Yes, it is considered advanced because it covers architecture, networking, MPLS and Segment Routing, services, and automation and assurance in depth.
No single resource should be treated as enough by itself. A focused dump-based review can help with question familiarity, but you should also understand the concepts and practice applying them.
Hands-on experience is highly useful because the exam emphasizes practical knowledge of service provider core technologies and operational understanding.
QA4Exam.com helps by giving you exam PDF questions and answers and an online practice test that simulates the real exam, so you can review verified answers and improve time management.
The Exam PDF is designed for study and review, while the Online Practice Test provides a test-like experience with actual questions and answers for preparation.
Retake rules depend on Cisco's exam policies, so you should check the current Cisco guidelines before scheduling another attempt.