Try Free CWNP CWNA-108 Updated Questions & Answers

Most Recent CWNP CWNA-108 Exam Dumps

Prepare for the CWNP Certified Wireless Network Administrator Exam exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the CWNP CWNA-108 exam and achieve success.

Actual CWNP CWNA-108 Exam Questions

Question 1

What statement about 802.3, Clause 33 Power over Ethernet is true?

AWhen using CAT5 cabling, you increase the maximum draw available to the PD over that available with CAT6.

BOnly endpoint PSEs are supported.

COnly midspan PSEs are supported.

DThe lowest voltage drop is achieved when using CAT6 cable instead of Cat5 or CAT5e.

Correct answer: D

https://www.cablinginstall.com/articles/2012/08/cat-6a-vs-cat-5e-poe.html

Question 2

A WLAN transmitter that emits a 50 mW signal is connected to a cable with 3 dB loss. If the cable is connected to an antenna with 9dBi gain, what is the EIRP at the antenna element?

A26 dBm

B13 dBm

C23 dBm

D10 dBm

Correct answer: C

Question 3

What cipher suite is specified by the 802.11-2016 standard and is not deprecated?

AWired Equivalent Privacy

BTemporal Key Integrity Protocol

CCounter Mode with CBC-MAC Protocol

DExtensible Authentication Protocol

Correct answer: C

Question 4

You are troubleshooting a problem with interference from a non-802.11 device. Given that the device is not a WLAN device, you cannot use a protocol analyzer and have chosen to use a spectrum analyzer. You want to view the signal from the interfering device over time to see the activity that is generating.

What common spectrum analyzer view should you use for this analysis?

AAPs

BWaterfall/Spectrogram

CReal-time FFT

DClients

Correct answer: B

Question 5

What statement about the beamwidth of an RF antenna is true?

AHorizontal and vertical beamwidth are calculated at the points where the main lobe decreases power by 3 dB.

BThe beamwidth patterns on an antenna polar chart indicate the point at which the RF signal stops propagating.

CWhen antenna gain is lower, the beamwidth is also lower in both the horizontal and vertical dimensions.

DVertical beamwidth is displayed (in degrees) on the antenna's Azimuth chart.

Correct answer: A

CWNA-108 Exam Dumps and Practice Questions

Most Recent CWNP CWNA-108 Exam Dumps

Actual CWNP CWNA-108 Exam Questions

Unlock all CWNP CWNA-108 questions