Limited-Time Offer: Enjoy 50% Savings! - Ends In 0d 00h 00m 00s Coupon code: 50OFF
Welcome to QA4Exam

Free practice questions with explanations

Free Cisco 350-801 Exam Dumps and Practice Questions

11 original Implementing and Operating Cisco Collaboration Core Technologies exam practice questions with answers and explanations.

Covers Cloud And Hybrid Services, On-Premises Call Control, Infrastructure And Design, Media And Qos and 2 more.

Question types: single answer, multiple answers, drag and drop, dropdown and order list. A new question is added every 15 days.

11 questions

Cisco 350-801 Practice Questions

Question 1

Topic: Cloud And Hybrid Services

Single Answer

A company is moving its branch phones to Webex Calling while retaining a small on-premises PBX for a regulated application. Calls from Webex Calling users to the PBX must use a private connection, and calls to the public network must continue through the carrier trunk managed by Webex Calling. The company wants to avoid maintaining per-user routing exceptions and requires the branch to keep its existing number ranges. Which configuration best meets these requirements?

Correct answer: A

A location provides the organizing scope for numbers and calling configuration, while a Local Gateway trunk and route group provide the private path to the retained PBX. Webex Calling can continue to route PSTN calls through its configured carrier connection. Per-user translation patterns would create avoidable administration and do not provide the requested routing architecture. Making the PBX the default external route would divert public-network calls from the carrier trunk. A common-area assignment is not an appropriate substitute for configuring the users' location and routing.

Question 2

Topic: Infrastructure And Design

Multiple Answers

A regional collaboration deployment uses a single CUCM cluster across two data centers. The publisher and subscriber nodes are separated by a WAN with variable latency, and a planned data-center outage must not interrupt call control for devices homed at the surviving site. The design team cannot add a second independent CUCM cluster this quarter. They also need a recovery procedure that preserves the supported cluster upgrade sequence. Which two design and operational actions should the team select? (Choose two.)

Correct answer: A, E

Call-processing subscribers at both sites, with appropriate device redundancy settings, allow devices to register to surviving call-control resources when one site is unavailable. Inter-site clustering is sensitive to network latency and bandwidth, so validating those constraints is essential before relying on the design. A subscriber does not become an independent publisher during a data-center outage. CUCM cluster upgrades follow a prescribed node sequence; upgrading the publisher first is not the supported general procedure. TFTP supports configuration and firmware delivery, not call processing.

Question 3

Topic: Media And Qos

Single Answer

A campus has intermittent choppy audio during busy periods. Packet captures show that RTP packets are marked DSCP EF at the phones, but packets arriving at the WAN edge are often marked best effort. The access switches trust markings from phones, while an intervening wireless controller rewrites markings for traffic from the same voice VLAN. The organization will not replace the controller before its next maintenance window. What should the network engineer do first to isolate and correct the QoS fault?

Correct answer: D

The discrepancy between phone-originated EF markings and best-effort markings at the WAN edge points to a trust or remarking issue on the path. Checking each hop identifies where markings are lost, and correcting the controller's treatment of the voice traffic addresses the observed fault. Increasing LLQ capacity does not repair packets that reach the edge in the wrong class. Marking all controller traffic EF would incorrectly prioritize non-voice traffic. Disabling access-switch QoS neither identifies nor corrects the controller's rewriting behavior.

Question 4

Topic: On-Premises Call Control

Order List

An enterprise needs a new international calling route in CUCM. The route must be available only to a designated calling class, require an authorization code, and use a gateway route list. The dial pattern is not yet present, and the route must not be exposed to ordinary users while it is being built. Arrange the configuration steps in the order that produces a usable, controlled route.

Drag the steps into the correct order, or use the arrows.

  1. Place the route pattern in a restricted partition and add that partition to the authorized CSS.
  2. Create the international route pattern and associate it with the route list.
  3. Enable FAC enforcement for the route pattern and configure the required authorization level.
  4. Create the gateway route group and add the intended gateway.
  5. Create a route list that references the route group.
Correct answer:
  1. Create the gateway route group and add the intended gateway.
  2. Create a route list that references the route group.
  3. Create the international route pattern and associate it with the route list.
  4. Place the route pattern in a restricted partition and add that partition to the authorized CSS.
  5. Enable FAC enforcement for the route pattern and configure the required authorization level.

The gateway must first be available through a route group, which the route list can then reference. The route pattern is created against that route list. Restricting its partition and exposing that partition only through the authorized CSS controls which callers can reach it. FAC enforcement then requires the appropriate authorization code for calls matching the route. Creating the pattern before its route-list destination is configured leaves its routing target incomplete, while exposing a broadly accessible partition would violate the stated access constraint.

Question 5

Topic: Protocols And Endpoints

Single Answer

A company deploys SIP phones registered to CUCM. A call to an external conference service connects, but the service does not recognize digits entered after answer. The CUCM trace shows that the phone sends telephone events in the RTP stream, while the outgoing SIP trunk negotiation advertises only in-band DTMF. The carrier confirms that it supports RFC 4733 telephone events. The company cannot change the conference service and wants to avoid transcoding. What is the best corrective action?

Correct answer: D

The trace isolates the mismatch: the endpoint sends RTP telephone events, but the trunk advertises only in-band DTMF. Aligning the call path to negotiate RFC 4733, also known as RFC 4733 telephone-event, allows the carrier-supported events to reach the service without transcoding. Enabling in-band DTMF at the phone does not correct the trunk's advertised capability. SIP INFO is not required by the stated carrier behavior, and telephone events can be carried across a correctly negotiated SIP trunk. A transcoder adds unnecessary resources and does not address the configuration mismatch directly.

Question 6

Topic: Voice Gateways And Session Border Controllers

Drag And Drop

A Cisco IOS XE CUBE must send calls to two provider SBCs using DNS SRV-based destination selection and OPTIONS keepalives. The enterprise requires a shared server definition for both destinations and a dial peer that references that group. Match each configuration requirement to the IOS XE feature that provides it.

Drag each item onto its matching target. On a phone: tap an item, then tap a target.

Resolve provider targets using DNS SRV
Reference the reusable destination set from an outbound dial peer
Define the provider SBC destinations as a reusable set
Check peer availability with SIP OPTIONS
Voice class server-group
Voice class sip-options-keepalive
DNS SRV lookup for the server group
Server-group destination on the dial peer
Correct answer:
  • Define the provider SBC destinations as a reusable set → Voice class server-group
  • Check peer availability with SIP OPTIONS → Voice class sip-options-keepalive
  • Reference the reusable destination set from an outbound dial peer → Server-group destination on the dial peer
  • Resolve provider targets using DNS SRV → DNS SRV lookup for the server group

A voice class server-group holds reusable server destinations and can use DNS SRV resolution where configured. SIP OPTIONS keepalive monitors the reachability of SIP peers. An outbound dial peer can reference the server group as its destination, centralizing the target definition rather than duplicating individual destinations. Defining only a server group does not perform availability monitoring, and OPTIONS keepalive does not itself select or resolve destinations. The DNS SRV behavior belongs to destination resolution, not to the dial peer's call classification.

Question 7

Topic: Cloud And Hybrid Services

Single Answer

A healthcare organization needs to automate creation and removal of Webex users from its authoritative identity system. The identity team can operate an on-premises synchronization component, but it does not want to build and support a custom application or manage API credentials. Changes must flow from the directory to Control Hub, and administrators need to retain role-based access controls there. Which approach best meets the requirement?

Correct answer: C

Directory Connector is the appropriate managed approach when an organization wants its on-premises directory to synchronize users to Control Hub without implementing its own provisioning client. Administrative roles remain governed through Control Hub RBAC. Webhooks notify applications about events; they are not a directory synchronization mechanism for creating users. A custom SCIM client adds the application and credential management the organization wants to avoid. CUCM LDAP synchronization serves on-premises CUCM user management and does not provision Webex users into Control Hub.

Question 8

Topic: On-Premises Call Control

Dropdown

A company wants an internal extension to be transformed to a globalized number before CUCM applies the same route pattern used by other sites. The phones' CSS can reach the transformation pattern's partition and the route pattern's partition. Complete the configuration statement for the required transformation behavior.

Choose the correct value for each blank.

Configure a CUCM that matches the internal extension, transforms it to +E.164, and has enabled so CUCM continues routing after the transformation.
Correct answer:

Configure a CUCM translation pattern that matches the internal extension, transforms it to +E.164, and has Urgent Priority enabled so CUCM continues routing after the transformation.

A translation pattern can match the original dialed digits, apply called-party transformations such as converting an extension to +E.164, and then continue routing. Enabling Urgent Priority allows CUCM to stop collecting additional digits and process the match promptly, which is appropriate when the complete extension is known. A route pattern selects a route rather than serving as the digit-transformation step described. A directory number identifies a line, and a SIP route pattern is not the relevant transformation configuration. The other listed settings do not provide the required continued routing behavior.

Question 9

Topic: Infrastructure And Design

Single Answer

A company is preparing a secure SIP integration between CUCM and a third-party application. SIP signaling uses TLS, and media must use SRTP. The application reports that TLS negotiation succeeds, but calls fail when media is established. CUCM and the application present certificates that validate, and their clocks are synchronized. Which next diagnostic action is most useful?

Correct answer: B

Successful TLS setup, trusted certificates, and synchronized clocks narrow the likely failure to media negotiation. The SDP offer and answer show whether both sides agree on secure media profiles and provide compatible SRTP keying attributes. Replacing certificates is not justified when TLS negotiation succeeds and validation is confirmed. Disabling SRTP on only one side creates a security-policy mismatch rather than resolving it. SRTP keying is negotiated through the media signaling; changing NTP does not repair an incompatible SDP negotiation.

Question 10

Topic: Cloud And Hybrid Services

Multiple Answers

A company enables Webex Calling for a new location and wants to reduce toll-fraud exposure before users are migrated. Users should be able to call domestic destinations, but international destinations must be restricted to a small, approved group. Calls to premium-rate destinations must remain blocked even for that group. The solution must use native Webex Calling controls rather than an external policy engine. Which two actions best satisfy the requirements? (Choose two.)

Correct answer: B, C

Webex Calling outgoing calling permissions can restrict classes of destinations, and permissions can be applied so approved users receive the necessary international access without granting it to everyone. Premium-rate destinations should remain explicitly blocked even for those users. Carrier alerts detect misuse after calls have been placed and do not enforce the required policy. Rewriting international numbers as domestic does not provide a sound or reliable restriction. Voicemail PIN policy protects voicemail access, not outbound PSTN calling.

Question 11

Topic: On-Premises Call Control

Single Answer

A CUCM administrator investigates reports that users in one department can reach a restricted route pattern. The route pattern is in a restricted partition, and the department's phone CSS does not list that partition. A translation pattern in a partition that the phone CSS can reach matches the same digits and transforms them to a number that matches a less-restricted route pattern. The administrator must prevent the call without disrupting the department's other translation patterns. What is the best next action?

Correct answer: A

The reachable translation pattern provides an alternate path: it transforms the digits into a number that matches a route pattern the caller can use. Restricting or removing that translation path addresses the bypass while leaving unrelated translations intact. Moving the restricted route pattern into the department's CSS would grant the access the administrator intends to block. Urgent Priority affects digit collection and does not override partition/CSS access or reliably change the competing match. Adding the restricted partition also grants access, and FAC on every route pattern is broader than necessary.

More Cisco practice questions

Unlock all Cisco 350-801 questions

Full exam access, validated answers, and unlimited practice with no download limits.